Woodpecker Dental iLED Curing Light Lamp /Plus iLED II O-Light O-Light Max Light

Description: iLED:Cure 2mm reins in one secondLight intensity up to 2500mw/cm2Constant power output, born for restoration360 degree rotatable head, extend the possibility1 sec for curing, Go quicker than everergonomics design, optimize the hand-grip useBasic DataBattery: 3.7VPower input: AC100V-240VPackage：1PCColor: WhiteiLED Plus:Features: Wide spectrum, High light intensity, Focused light Constant power output, born for teeth restoration 360° curing, reach every angle Fluid design, better hand feeling Upgraded light intensity Two modes for option With the maximum light intensity of 2500mw/cm2 curing 2mm resin in 1 second Which makes it especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.Technical parameter 1. Light output: 1000 mW/cm2 ~2500mW/cm2 2. Wave length: 385nm-515nm 3. 360° rotatable head 4. 1 sec for curing 5. Time setting: Turbo (P1)-1s, 3s ,2300~2500 mw/cm² Normal (P2)-5s, 10s, 15s, 20s,1000~1200mw/cm² Dimensions: 25mm×25mm×240mm Net weight: 278g Power Input: 100V to 240V, 50Hz/60 Hz Wave length: 385nm-515nm Light intensity：1000mW/cm²-2300mW/cm²TWO Modes：TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000 mW/cm2-1200 mW/cm2. Model: ILED II Wide Spectrum (385nm-515nm)，Spotlight(8mm-10mm), Battery:2000mAh Made by Woodpecker (100% Original guaranteed) Cure 2mm reins in one second Light intensity up to 3000mw/cm2 Constant power output, born for restoration 360 degree rotatable head, extend the possibility 1 sec for curing, Go quicker than ever Ergonomics design, optimize the hand-grip use Basic Data Battery: 3.7V Power input: AC100V-240V Three Modes：1. Turbo Power Mode: screen shows P0, press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2700-3000 mW/cm22. High Power Mode: screen shows P1, press the time button to select of time which could be 3 and 5 seconds. Its output light intensity is about 1800-2000 mW/cm23. Standard Power Mode: screen shows P2, press the time button to select of time which could be 5, 10 ,15 and 20 seconds. Its output light intensity is about 1000-1200 mW/cm2. O-Light Curing Light： Two working modes:High、NormalTime Setting:High - 1Sec, 3Sec；Normal - 5 Sec,10Sec,15Sec, 20SecConstant light intensity : The Solidification effect is not affected by the consumption of remaining power.Large Capacity battery : A full charge can be used for more than 400 times continuously under 10s working time mode. Direction To Use: STEP 1:Switch on the LED Light Cure Unit with "Power Button". STEP 2:Press the mode button to set the working mode, the corresponding indicator will on when a mode set. Select the appropriate Time/Mode & start using the LED Light for curing TECHNICAL SPECIFICATIONS: Adapter Input：AC 100~240V , 50Hz/60Hz Output： DC 5V1A Light Source: High power Blue Light 5W Wavelength： 420nm~490nm Size: 268.8mm*26.1 mm*31.8mm Intensity High: 2300~2500 mw/cm2 Intensity Normal:1000~1200 mw/cm2 Net Weight :259g Battery Model: ICR 18490TWO Modes：TURBO Mode: screen shows P1, Press the time button to select oftime which could be 1 and 3 seconds.Its output light intensity is about2300 mW/cm2-2500 mW/cm2.NORMAL Mode: screen shows P2, Press the time button to selectof time which could be 5,10 ,15and 20 seconds.Its output light intensity is about1000 mW/cm2-1200 mW/cm2. O-Light Packing List: 1. Main unit of the LED x1 2. Light hoodx1 3. Adapterx1 4. Bathymeterx1 5. Pedestal chargerx1 6. Disposable sleevex1 7. Transparent coverx5 8. Instruction manualx1 9. Qualified certificatex1 O-Light Max Curing Light : Cure 2mm reins in one secondWoodpecker O-Light Curing Light Is a High Tech dental equipment and has a perfect quality assurance system.Two working modesHigh - 1Sec, 3SecNormal - 5 Sec,10Sec,15Sec, 20SecHIGH Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.Constant light intensity: The Solidification effect is not affected by the consumption of remaining power.Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.Packing List: 1. Main unit of the LED x1 2. Light hoodx1 3. Adapterx1 4. Bathymeterx1 5. Pedestal chargerx1 6. Disposable sleevex1 7. Transparent coverx5 8. Instruction manualx1

Price: 69.99 USD

Location: Fullerton, California

End Time: 2024-08-31T03:13:39.000Z

Shipping Cost: 0 USD