Description: DESCRIPTION ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B, 800×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard AntennaESP32-S3-Touch-LCD-4.3BIntegrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces FeaturesESP32-S3-Touch-LCD-4.3B is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applicationsEquipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencySupports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antennaBuilt in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAMOnboard 4.3inch capacitive touch display, 800×480 resolution, 65K colorSupports capacitive touch control via I2C interface, 5-point touch with interrupt supportOnboard voltage regulator, supports 7~36V wide range power supplyOnboard RTC chip and rechargeable battery to ensure time data is not lost when power lossOnboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.Supports passive and active digital input, with bi-directional optocoupler isolationSupports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking currentOnboard LED indicators for indicating the power and battery recharging statusSupports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenariosApplication ScenariosIPS Display PanelExcellent Display Performance, 160° Wide Viewing AngleCapacitive 5-Point TouchSupports Touch Function With I2C Interface, 5-Point Touch For Flexible Operation And Smooth Multi-Point UI InteractionSupports Multiple PeripheralsSupports The Expansion Of Multiple Peripherals Via CAN, RS485, I2C And Isolated IO InterfacesSupports Two Wiring MethodsComes With Two Types Of Screw Terminals, Allowing For Bottom Or Back Wiring, Which Is More Convenient To Integrate Into Various Application Scenarios Such As DIN Rail Or Embedded DevicesBottom Wiring Back WiringWhat's On BoardESP32-S3N8R8The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB FlashTF card slotUSB Type-C portBOOT buttonPress and hold while powering on for program burningRESET buttonOptocoupler isolationTouch panel connector4.3inch display panel connectorRS485 and CAN terminal resistors selectionclose by defaultBattery power supply ON/OFF3.7V single lithium battery GH1.25 headerStatus IndicatorsDONE: Lithium battery charging completed indicatorCHG: Lithium battery charging indicatorPWR: Power supply indicator(the CHG will blink and DONE will light on when connecting with DC power supply and without lithium battery connected or battery switch is OFF) 7-36V DC power supply terminalI2C interface terminalVOUT pin output 5V/3.3V (switching by onboard resistor)CAN interface terminalRS485 interface terminalDigital output5~36V, open-drain output, output load: 450mA per channel (MAX)Input signal common terminalNC: dry contact passive inputConnect to power supply positive: digital input low active, for NPN wet contact active input, 5V-36V DCConnect to power supply negative: digital input high active, for PNP dry contact active input, 5V-36V DCDigital input5~36V, supports passive / active input (NPN or PNP)Support Batch CustomizationSupport Software And Hardware CustomizationIncluding Hardware Interface, LOGO, Label, Case And Web Page, Etc.Outline DimensionsResources & Services ESP32-S3 LCD Selection GuideMODELESP32-S3-Touch-LCD-4.3BESP32-S3-Touch-LCD-4.3ESP32-S3-Touch-LCD-7 BASIC PARAMETERSProcessorHigh performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencyWi-Fi / BluetoothSupports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antennaFlash/PSRAM16MB Flash + 8MB PSRAM8MB Flash + 8MB PSRAMPower SupplyTypeC 5V + DC 6-36VTypeC 5VLCD PARAMETERSResolution800x480Display InterfaceRGBDisplay PanelIPSViewing Angle160°170°Touch TypecapacitiveTouch PanelToughened GlassCOMMUNICATIONS INTERFACECANTJA1051T/3RS485SP3485ENDigital Input2DI, 5~36V, passive Input / active Input (NPN or PNP), built in bi-directional optocoupler-Digital Output2DO, 5~36V, open-drain output, output load: 450mA per channel (MAX)-OTHERSOperating Temperature0℃ ~ 65℃Dimensions (L×W)112.4×75.1mm106.1×67.8mm192.96×110.76mm PACKAGE CONTENT Weight: 0.115 kgESP32-S3-Touch-LCD-4.3B (with back wiring 16PIN screw terminal) x116PIN screw terminal for bottom wiring ×112
Price: 45.57 USD
Location: 深圳
End Time: 2024-09-17T05:58:30.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Waveshare
Digital output: 5~36V, open-drain output, output load: 450mA per channel (MAX)
Screen Size: 4.3 in
Display Type: LCD
Maximum Resolution: 800×480
I2C interface terminal: VOUT pin output 5V/3.3V (switching by onboard resistor)
Color: Black
Model: ESP32-S3-Touch-LCD-4.3B
Features: Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz
Digital input: 5~36V, supports passive / active input (NPN or PNP)
