NuHeat Peel & Stick Uncoupling Floor Heat Membrane, 10.6 Ft² Sheets

Description: Global Trade and Distribution Inc.1- 905 660 7600 Technical support line Less mess: Eliminating the lower layer of thinset means it doesn't ooze up through the seams and no mixing or cleanup of thin-set is required when installing the membrane onto the substrate.High-performance crack resistance: achieves the same "High Performance" rating on ANSI A118.12 System Crack Resistance test as regular nVent NUHEAT Membrane.Faster installation: takes 40% less time to install based on contractor time trials.Less floor height build-up: Eliminating the lower layer of thinset reduces the total height of the floor assembly by about 1/8", lessening the likelihood that transition strips are required for adjacent flooring surfaces.No modifications required for cable fitment: accommodates nVent NUHEAT Cable, including the cold lead joint, the end seal, and the sensor probe without cutting or modification.Description:nVent NUHEAT Peel&Stick Membrane NUMEM250PS (FG0801) does not have a layer of fabric bonded to the bottom like our standard Membrane; instead, a pressure sensitive adhesive is applied directly to the underside of the polypropylene structure and the adhesive is protected by a release liner.The other unique features of nVent NUHEAT Peel & Stick Membrane are the mortar vents cut into the top of each pillar. These vents ensure a permanent bond by allowing mortar applied above the membrane to adhere to both the substrate and the floor covering materials.The first step when installing any membrane product is to dry fit the membrane for the entire area, ensuring you have sufficient supply for the job and cutting down sections to facilitate fitment as required. Once the pre-fitting is complete, the substrate must be cleaned and then prepped with any standard acrylic floor primer, readily available at most home improvement retailers and flooring distributors. Once the primer has begun to dry and feels slightly tacky to the touch, the release liner can be removed and Peel & Stick Membrane can be applied to the treated surface.The bond created between the adhesive and the treated substrate is very strong; however, to ensure a long-lasting, high-performance floor assembly that lives up to the nVent NUHEAT 25-year product warranty, the final permanent bond relies on the mortar applied on top of the membrane. Mortar flows through the vents, bonding to the substrate below. By applying either modified or unmodified thinset mortar to embed the heating cable and secure the floor covering, air gaps within the membrane pillars are sufficient to ensure the assembly still achieves the same High Performance rating on the ANSI A118.12 System Crack Resistance test that the standard nVent NUHEAT Membrane achieves. About the Product:The underfloor heating system is a highly efficient and eco-friendly way to warm your floors and can be used as a primary or secondary heat source. This system uses electric radiant floor heating cables/ wires with uncoupling waterproofing tile underlayment membrane/ sheets/ floor mats. Available Membranes:Schluter Systems DH512M or DH5MA Ditra Heat Membrane, Schluter Systems DHD810M or DHD8MA Ditra Heat DUO Membrane with sound control and thermal break layer, SunTouch HeatMatrix 8006GRY161-ST Membrane, Laticrete Strata Heat, Ardex UH900 or UI720 Flexbone Membrane, NuHeat AC0105, NUMEM250, FG0800 or FG0801 Peel & Stick Self Adhesive Membrane, Mapei 2855915 Mapeheat Membrane, Prodeso Heat Membrane, Prova TT8006RED15 Flex Heat Membrane. Please note that it's highly recommended to overlap all joint lines using the Kerdi Polyethylene waterproof band/ tape/ strip. Applicable for both residential and commercial usage. To control the In-floor heating system and set the underfloor temperature of your heated floors, you can use a variety of thermostats (Voltage: 120V/ 240V). Available Thermostats:Schluter Systems Ditra Heat DHERT104BW Wi-Fi Touchscreen Programmable Thermostat, Schluter Systems Ditra Heat DHERT103BW Non-Programmable Thermostat, Schluter Systems Ditra Heat DHERT102BW Touchscreen Programmable Thermostat, NuHeat AC0055 Signature WiFi Touchscreen Programmable Thermostat, NuHeat AC0056 Home Touchscreen Programmable Thermostat, NuHeat AC0057 Element Non-Programmable Thermostat, OJ Microline UWG4-4999 WIFI Touchscreen Programmable Thermostat by OJ Electronics, OJ Microline UDG4-4999 Touchscreen Programmable Thermostat, OJ Microline UTN4-4999 Non-Programmable Thermostat, Mapei Mapeheat 2855301 WiFi Programmable Touchscreen Thermostat 94553-01, Mapei Mapeheat 2855201 Programmable Touchscreen Thermostat 94552-01, Mapei Mapeheat 2855401 Non-Programmable Thermostat 94554-01, ARDEX FLEXBONE UH 930 WiFi Touchscreen Programmable Thermostat, ARDEX FLEXBONE UH 931 Touchscreen Programmable Thermostat, ARDEX FLEXBONE UH 932 Digital Non-Programmable Thermostat UH-932, EASY HEAT GTS1 FGS Programmable Thermostat, Laticrete Strata Heat 0802-0404-T WiFi Programmable Touchscreen Thermostat LA08020404, Laticrete Strata Heat 0802-0403-T Programmable Touchscreen Thermostat LA08020403, Laticrete 0804-0404-TW WiFi Smart Programmable Touchscreen Thermostat, Laticrete 0804-0403-TW WiFi Programmable Touchscreen Thermostat, Laticrete 81020606 WiFi Programmable Touchscreen Thermostat, SunTouch SunStat WiFi Programmable Touchscreen Thermostat 500875-SB, SunTouch SunStat Command Touchscreen Programmable Thermostat 500850-SB, SunTouch SunStat Core Non-Programmable Thermostat 500825-SB, True Comfort PS120/240WF Wi Fi Programmable Floor Heating Thermostat, Honeywell TH115AFGB Programmable Floor Heating Thermostat. The above building materials are designed to make your home cozy and warm. The floor heating systems could be installed in the bathroom, shower, kitchen, living room, hallway, bedroom, and dining areas, over plywood or concrete floor using thin-set mortars. Taxes are paid during check-out, no hidden fees. US & Canadian customers won't have to pay any extra import charges when your item is delivered. Customers from any other country may be subjected to import charges. A tracking number is always included so you can track your order right to the door (a Signature may be required).

Price: 40 CAD

Location: 45 Tigi Ct, Concord, ON, 905-660-7600

End Time: 2024-08-25T16:59:07.000Z

Shipping Cost: 0 CAD