Description: Crank Milling Machine Knee Crank handle Mill Parts Swivel Handle Fit BridgeportDescriptionThe elevating knee crank is made of stainless steel, which is more heat-resistant, corrosion-resistant, and wear-resistant. The elevating knee crank with the one-piece casting doesn't have slits on the whole, so it is uneasy to break during operation. This combination of gearshaft clutch, the elevating knee crank, and the handle can effectively lift and lower the milling machine. It is suitable for all kinds of milling machines. Key FeaturesOne-piece Casting: The elevating knee crank with the one-piece casting doesn't have slits on the whole, so it is uneasy to break during operation. Heat-resistant: The elevating knee crank is made of stainless steel, which is more heat-resistant and uneasy to explode and damage during operation. Corrosion-resistant: The elevating knee crank is made of stainless steel so that it has good corrosion resistance even if it comes into contact with something highly corrosive. Wear-resistant: The elevating knee crank is made of stainless steel so that its joints do not wear out easily even if it has been used for a long time. Comfortable to Grip: The elevating knee crank with this curvature design is ergonomic so that it is more comfortable and convenient to grip. Better Performance: This combination of gearshaft clutch, the elevating knee crank, and the handle can effectively lift and lower the milling machine. Easy to Clean: You easily clean it without much effort and time because of its smooth surface. Customer Service: If you have any questions, please feel free to contact us, we are willing to answer your questions. DetailsNine-tooth Clutch: The nine-tooth clutch can be tightly connected to the notches of the crank. The clutch is not easily dislodged from the crank when the crank is turned. Screw Connection Port: The handle with the screw connection port can be tightly connected to the elevating knee crank, so the handle is not easily dislodged from the crank. ApplicationIt is suitable for all kinds of milling machines. SpecificationColor: Silver, BlackProduct Material: Stainless SteelMilling Machine Lifting Crank: 9 TeethInner Diameter: 27.5mm/1inchInner Hole: 16mm/0.6inchOuter Diameter: 39.5mm/1.6inchPacking Size: 8.8*8.8*26.5cm/3.5*3.5*10.4inchPackage Weight: 1.12kg/2.5lbs Package Included1 x Elevating Knee Crank 1 x Gearshaft Clutch1 x Handle NotesPlease allow the slight color difference caused by the shooting light and 1-3 mm error due to manual measurement, and make sure you do not mind before ordering.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.
Price: 14.25 USD
Location: Chino, California
End Time: 2024-11-17T04:28:27.000Z
Shipping Cost: 8.25 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Features: Made of high quality material, Durable
MPN ( MPN ): n/a
Item location: CA /NJ /Austell
Brand: Unbranded
MPN: Does Not Apply
Color: silver and Black.
Packing size: 8.8*8.8*26.5cm
Package weight: 1.12kg
Material: Stainless Steel
Milling machine lifting crank specificat: 9 teeth
Inner diameter: 27.5mm
Inner hole: 16mm
Outer diameter: 39.5mm
Machine Type: Milling Machine
Function: N/A
Control: N/A
EAN: Does not apply
UPC: Does not apply
ISBN: Does not apply