Description: MFM SubSeal 60 is a self-adhering, waterproofing membrane comprised of a rubberized asphalt adhesive laminated to a multi-layer of puncture-resistant, reinforced polyethylene. This combines strength and flexibility to create an ideal sealing foundation for walls, exterior walls, through-wall flashings, around doors and windows, underneath stucco, plaster and masonry, planters, pot shelves, and as a flashing material. SubSeal is also ideal for waterproofing and protecting ICF foundations and can be utilized as a pipe wrap or protective covering for rigid insulation. It is not recommended to use SubSeal as a roofing underlayment, because it can be hazardous working on a roof due to the slippery nature of the SubSeal. This membrane can adhere to most clean, dry surfaces such as metal, wood, rigid vinyl, masonry, poured concrete, concrete block, wallboard/mortarboard, foam insulation board, and other building materials such as a house wrap. however, if concrete, OSB, masonry, Densdeck, and Fiberock are used, then the surface must first be dry, fully cured, and primed with an asphalt-based primer before applying the SubSeal. It is easy to cut Subseal to shape using scissors or a sharp knife if an alteration in the size of the membrane is needed. For the best adhesion, SubSeal can be applied by rolling the entire surface with a hand roller while focusing attention, particularly on seams. This particular membrane must be covered within 90 days of application. MFM backs SubSeal 60 with a 10-year limited warranty. FeaturesHigh elongation that contracts and expands with the surface of the buildingOuter film is compatible with most construction sealantsSpecially formulated for extreme moisture protectionRubberized asphalt won't crack or drySelf-sealing around fasteners to prevent water penetrationUniform thickness for protection that is dependableIdeal for below grade foundations and structuresQuick and easy installation SpecificationsRoll Length: 60 ft.Roll Width: 12in.,37in.Roll Coverage: 180 square ft.Roll Weight: 12in. - 24lbs., 37in. - 72lbs.Roll Thickness: 60 milsCompliant Codes: ASTM D 1970, ICC-ES AC 38, ASTM E 96, ASTM D 779, ASTM D 882
Price: 255.56 USD
Location: Toledo, Ohio
End Time: 2024-05-03T12:37:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: MFM
MPN: 51S60
Available Variations
Color: 37in.
Price: 4987.13 USD
Available Quantity: 1
Quantity Sold: 0
Color: 37in.
Price: 255.56 USD
Available Quantity: 48
Quantity Sold: 16
