McIntosh

McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -

Description: McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More - Complete Standout Features:• Dolby Atmos, DTS:X and Auro-3D• High Dynamic Range: HDR10, Dolby Vision and HLG• 4K Ultra HD; 11.2 Channels; AirPlay; BluetoothThe MX122 was recently replaced with the MX123 ($9,000) which is 8K capable.Other than the video processing the units are very similar.This came from a single owner who is super gentle and mindful with his gear.This is a complete kit including the original McIntosh shipping carton, manual, remote, and the room calibration mic with mic stand.• The MX122 can serve as the brain center for an advanced home theater system for years to come.• Supports object-based 3D audio formats including Dolby® Atmos, and will be upgradable for DTS:XTM and Auro-3D®. Popular legacy surround sound formats are also supported.• Plays 4K Ultra HD native sources as well as upconverting lower resolutions to 4K Ultra HD for the best possible picture quality. Compatible with 3D video.• All HDMI inputs and outputs are HDCP 2.2 and support High Dynamic Range (HDR), 4K Ultra HD at 50/60Hz, 4:4:4 color, Rec. 2020 and 3D video pass-through.• Audyssey MultEQ® XT32 calibrates the MX122 to your room’s unique acoustical properties, letting it deliver the clearest and most balanced sound possible.• Ample amount of connections to connect your existing and future HD, 4K Ultra HD and audio sources.• Wi-Fi, Bluetooth and AirPlay® provide further connection choices.Interfaces to popular streaming services including Pandora®, SiriusXM® and Spotify®.SkyFi Cosmetic Notes:Small chip on the left bottom corner of the glass as shown in our photos, otherwise looks like new.Ownership:Second OwnerConnections:RCA and XLR for most Audio inputs and Output. HDMI Video, Removable Power Cord. 12V TriggersGeneral Sound:Accurate to RecordingCosmetic Condition:7/10 = Good. One or two minor scratches. Well Maintained. See our detailed rating description here.Working Condition:Working perfectly and tested on our bench and listening room.Included:Complete kit as it left the factory. Manual, Remote and microphone.Packing:Original Manufacturers PackingSpecs:MX122 A/V processorFrequency Response:±0.5dB from 20Hz-20kHzTotal Harmonic Distortion:0.005% maximum from 20Hz to 20kHzRated Output Voltage:2.5 Vrms Unbalanced 5.0 Vrms BalancedInputs:9 Stereo (8 unbalanced + 1 balanced) 7 HDMI4 Composite3 Component2 Optical2 Coax1 Multi-channel 7.1 (unbalanced)Outputs:13 Balanced (configured for 11.2)15 Unbalanced (configured for 11.2)3 HDMI2 Component (1 for zone B)2 Composite (1 for zone B)2 Stereo (unbalanced for zones B & C)Video Processing:4K Ultra HD native sources, upconverting lower resolutions to 4K Ultra HDAudio Processing:Dolby: Atmos, TrueHD pluslegacy formatsDTS: DTS:X (with upgrade),HD Master Audio plus legacy formats Auro: 3D, Auro-Matic, 9.1, 10.1(with upgrade)Control:Remote control (included), network, RS232Non-McIntosh-Provided Services:Embedded and/or non-embedded services (including but not limited to AirPlay, Pandora, SiriusXM and Spotify), are necessary for full functionality, are provided by companies unrelated to McIntosh, and are beyond McIntosh’s control. McIntosh cannot and does not warrant against interruption, discontinuance, unsatisfactory performance, reduced Product functionality, or damages of any kind attributable to such services or their providers.Dimensions:(W x H x D): 17-1/2” (44.45cm) x 7-5/8” (19.37cm) including feet x 19-1/2” (49.53cm) including the front panel, knobs & cablesWeight:31.0 lbsTesting Process:We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect the PCB’s for discoloration from resistors or transistors that may have been running hot. On vintage units we often spot check select capacitors for value and ESR.When we first power on a preamplifier we connect its RCA output to a Sencore PA81 Power Analyzer which simulates real world loading conditions and gives us an oscilloscope interface. The first order of business is checking that the volume control works smoothly throughout its entire range with acceptable channel balance. This is accomplished by feeding a 1KHz sine wave into one of the preamp’s line level inputs while monitoring the preamp’s output on an oscilloscope. We then switch to a 1KHz square wave to test the tone controls, loudness function, and filters where applicable. During this step we are watching for equal alteration of the test signal by both channels. This also helps us identify dirty controls that will need treatment. Once the basic line stage functions are verified, we test each input individually. This is especially important for devices that use relays to select their sources. If the preamp is equipped with a phono stage we test that as well. We use an inverse RIAA filter which allows us to feed a reference test signal into the phono input with the proper RIAA equalization and level. A square wave or sine sweep is used to verify that the device’s phono stage is faithfully reproducing the RIAA curve. If the preamp under test has balanced inputs and/or outputs these are tested as well.We finish up our bench testing with a listening test with our bench amplifier and reference speakers. During this test we check for hum or hiss that may not have shown up in earlier testing. We also check that all of the tone controls and filters perform as expected. If the preamplifier has remote control functions these are also tested. Preamps with tube circuits or complicated power supply topologies are connected at our long term test rig for extended stress testing under real world conditions. McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More - Complete Standout Features: • Dolby Atmos, DTS:X and Auro-3D • High Dynamic Range: HDR10, Dolby Vision and HLG • 4K Ultra HD; 11.2 Channels; AirPlay; Bluetooth The MX122 was recently replaced with the MX123 ($9,000) which is 8K capable. Other than the video processing the units are very similar. This came from a single owner who is super gentle and mindful with his gear. This is a complete kit including the original McIntosh shipping carton, manual, remote, and the room calibration mic with mic stand. • The MX122 can serve as the brain center for an advanced home theater system for years to come. • Supports object-based 3D audio formats including Dolby® Atmos, and will be upgradable for DTS:XTM and Auro-3D®. Popular legacy surround sound formats are also supported. • Plays 4K Ultra HD native sources as well as upconverting lower resolutions to 4K Ultra HD for the best possible picture quality. Compatible with 3D video. • All HDMI inputs and outputs are HDCP 2.2 and support High Dynamic Range (HDR), 4K Ultra HD at 50/60Hz, 4:4:4 color, Rec. 2020 and 3D video pass-through. • Audyssey MultEQ® XT32 calibrates the MX122 to your room’s unique acoustical properties, letting it deliver the clearest and most balanced sound possible. • Ample amount of connections to connect your existing and future HD, 4K Ultra HD and audio sources. • Wi-Fi, Bluetooth and AirPlay® provide further connection choices. Interfaces to popular streaming services including Pandora®, SiriusXM® and Spotify®. SkyFi Cosmetic Notes: Small chip on the left bottom corner of the glass as shown in our photos, otherwise looks like new. Ownership: Second Owner Connections: RCA and XLR for most Audio inputs and Output. HDMI Video, Removable Power Cord. 12V Triggers General Sound: Accurate to Recording Cosmetic Condition: 7/10 = Good. One or two minor scratches. Well Maintained. See our detailed rating description here. Working Condition: Working perfectly and tested on our bench and listening room. Included: Complete kit as it left the factory. Manual, Remote and microphone. Packing: Original Manufacturers Packing Specs: MX122 A/V processor Frequency Response: ±0.5dB from 20Hz-20kHz Total Harmonic Distortion: 0.005% maximum from 20Hz to 20kHz Rated Output Voltage: 2.5 Vrms Unbalanced 5.0 Vrms Balanced Inputs: 9 Stereo (8 unbalanced + 1 balanced) 7 HDMI 4 Composite 3 Component 2 Optical 2 Coax 1 Multi-channel 7.1 (unbalanced) Outputs: 13 Balanced (configured for 11.2) 15 Unbalanced (configured for 11.2) 3 HDMI 2 Component (1 for zone B) 2 Composite (1 for zone B) 2 Stereo (unbalanced for zones B & C) Video Processing: 4K Ultra HD native sources, upconverting lower resolutions to 4K Ultra HD Audio Processing: Dolby: Atmos, TrueHD plus legacy formats DTS: DTS:X (with upgrade), HD Master Audio plus legacy formats Auro: 3D, Auro-Matic, 9.1, 10.1 (with upgrade) Control: Remote control (included), network, RS232 Non-McIntosh-Provided Services: Embedded and/or non-embedded services (including but not limited to AirPlay, Pandora, SiriusXM and Spotify), are necessary for full functionality, are provided by companies unrelated to McIntosh, and are beyond McIntosh’s control. McIntosh cannot and does not warrant against interruption, discontinuance, unsatisfactory performance, reduced Product functionality, or damages of any kind attributable to such services or their providers. Dimensions: (W x H x D): 17-1/2” (44.45cm) x 7-5/8” (19.37cm) including feet x 19-1/2” (49.53cm) including the front panel, knobs & cables Weight: 31.0 lbs Testing Process: We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect the PCB’s for discoloration from resistors or transistors that may have been running hot. On vintage units we often spot check select capacitors for value and ESR. When we first power on a preamplifier we connect its RCA output to a Sencore PA81 Power Analyzer which simulates real world loading conditions and gives us an oscilloscope interface. The first order of business is checking that the volume control works smoothly throughout its entire range with acceptable channel balance. This is accomplished by feeding a 1KHz sine wave into one of the preamp’s line level inputs while monitoring the preamp’s output on an oscilloscope. We then switch to a 1KHz square wave to test the tone controls, loudness function, and filters where applicable. During this step we are watching for equal alteration of the test signal by both channels. This also helps us identify dirty controls that will need treatment. Once the basic line stage functions are verified, we test each input individually. This is especially important for devices that use relays to select their sources. If the preamp is equipped with a phono stage we test that as well. We use an inverse RIAA filter which allows us to feed a reference test signal into the phono input with the proper RIAA equalization and level. A square wave or sine sweep is uséd to verify that the device’s phono stage is faithfully reproducing the RIAA curve. If the preamp under test has balanced inputs and/or outputs these are tested as well. We finish up our bench testing with a listening test with our bench amplifier and reference speakers. During this test we check for hum or hiss that may not have shown up in earlier testing. We also check that all of the tone controls and filters perform as expected. If the preamplifier has remote control functions these are also tested. Preamps with tube circuits or complicated power supply topologies are connected at our long term test rig for extended stress testing under real world conditions. × × × × × × × × × × × Buy now and save! Tell a friend Visit store Watch now Postage info UPS Ground - $0.00 Local Pickup - $0.00 Click the Postage tab above the listing description for more info Additional delivery notes PICK UP OPTION Our items are available for pick-up. Pick up procedure is as follows: Purchase the item through eBay Email us to coordinate pickup PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Dynavector 10x3 High-Output MC Phono Cartridge Music Reference RM-5 MK II Tube Preamplifier with Phono WyWires Silver Series Phono Interconnects - 5 Pin DIN w/ XLR Connectors - 4ft Music Reference RM-9 Tube Amplifier With EL34's Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © SkyFi Audio Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are not accepted Seller will pay for return shipping. eBay integration by

Price: 5020 USD

Location: Glen Rock, New Jersey

End Time: 2025-01-12T22:08:00.000Z

Shipping Cost: 0 USD

Product Images

McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -McIntosh MX122 A/V Processor w/4K Ultra HD, HDR10, Dolby Vision & Atmos, More -

Item Specifics

All returns accepted: ReturnsNotAccepted

Return policy details:

Brand: McIntosh

MPN: MX122

Model: MX122

Type: N/A

Recommended

MCINTOSH MLD7020 LASERDISC PLAYER
MCINTOSH MLD7020 LASERDISC PLAYER

$1795.00

View Details
McIntosh MAC 1700 Vintage Tube Hybrid Stereo Receiver (sounds great)
McIntosh MAC 1700 Vintage Tube Hybrid Stereo Receiver (sounds great)

$900.00

View Details
Vintage McIntosh MX130 A/V Black Home Theater Processor Tuner Controller Center
Vintage McIntosh MX130 A/V Black Home Theater Processor Tuner Controller Center

$999.99

View Details
McIntosh McAire Integrated Audio System - Used W/ Remote Control
McIntosh McAire Integrated Audio System - Used W/ Remote Control

$1597.15

View Details
MCINTOSH MX134 A/V CONTROL CENTER WITH REMOTE
MCINTOSH MX134 A/V CONTROL CENTER WITH REMOTE

$1399.00

View Details
McIntosh MP100 MM & MC Phono Preamplifier
McIntosh MP100 MM & MC Phono Preamplifier

$1683.00

View Details
McIntosh MVP851 DVD / CD Audio / Video Player
McIntosh MVP851 DVD / CD Audio / Video Player

$675.00

View Details
McIntosh MC162 Audiophile Solid State Power Amplifier
McIntosh MC162 Audiophile Solid State Power Amplifier

$2300.00

View Details
McIntosh MAC 4100 Vintage FM/AM 150-watt Receiver (Fully Serviced, New Caps)
McIntosh MAC 4100 Vintage FM/AM 150-watt Receiver (Fully Serviced, New Caps)

$1761.11

View Details
Stereotech 1200 Vintage Stereo Receiver (licensed by McIntosh, nice)
Stereotech 1200 Vintage Stereo Receiver (licensed by McIntosh, nice)

$700.00

View Details