Light Viper Fiber Optic Snake System For Digital Audio Transport

Description: Complete LightViper Digital Audio Transport System: Includes: VIS-4832 ~ Takes in 32ch AES, Has 8ch of Returns AES or AnalogVIM-1832 ~ Spits Out 32ch from VIS-4832 as AES AND Analog, Has 8ch of AES or Analog Inputs for Returns to VIS2 x 1u Panels with Heavy Duty Delphi Fiber Connectors to ST1 x 500ft Tac 4 Fiber Reel with Heavy Duty Delphi Fiber Connectors. We used this system to transport 32 channels of Digital Audio from FOH to a Broadcast Location. The VIS-4832 has a split out too, so could be used to send Digital Audio to two different locations. Tested fine. We ran AES 96khz through it, and also analog on each end via the returns all works. Here is some info from the Manufacturer. The VIS-4832 is normally used in connection with the VIM-1832 or VIM-MY32 YGDAI cards to achieve a 32×8 fiber-optic transport system. The VIS-4832 / VIM-1832 or VIM-MY32 system is normally used as a transport for STAGE to FOH with or without splits, using other manufacturers digital mic-pre’s input to the VIS-4832. This VIS-4832 / VIM-1832 system can also be used as a 32 channel drive snake. This device contains 32 AES digital inputs and 8 analog OR 8 digital outputs (returns). There are word clock & super clock outputs presented on BNC connectors. The VIS-4832 is supplied with a pair of transmit/ receive LC fiber connectors (other connector types possible). 2 fiber optic splits are available as an option. These splits (transmit only) are presented on single LC connectors. The VIS-4832 will operate at 48k or 96k There are “sync” status LED’s on the front and rear panels of the unit. These LED’s will be solid green when in sync, flashing red and green while looking for sync, and solid red when no sync is present.

Price: 1500 USD

Location: Camarillo, California

End Time: 2024-08-08T22:02:07.000Z

Shipping Cost: 0 USD