Description: Note:1.The Scanner can only check engine system, it cannot check ABS,SRS,TPMS,EPB and so on.... If you want to buy other system scanner, you can contact me, I will recommend one for you.2. The Scanner can only Check Engine Light/Turn off MIL, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, it doesn't have reset function.3.The Scanner can cover most OBD2 car model,but it cannot work on van or truck. If you don't know if the item can work on your car, you can contact me, I will confirm for you. 4.The Scanner doesn't need to charge. You just need to connect to your car OBD2 port. [ Read and Clear Codes ] : LAUNCH Creader 3001 obd2 scanner read and clear fault codes for engine system. In addition, Creader 3001 built in fault codes definition lookup library. LAUNCH Creader 3001 obd2 scanner works on most 1996 and newer US-based vehicles that are OBDII compliant (OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). "PLUG AND PLAY" scan tool, equipped with a 2. 5 feet long cable and made of a very thick flexible insulator, very easy to use for beginners. [ I/M Readiness Status Test] : You can use this obd2 scanner to check the status of emission-related monitors misfire system and fuel system, make sure the monitor was set before taking it to smog, help you pass the Smog Check easily, save your money for paying fine tickets. [ Check Engine Light and Identify VIN information] : Turns off the MIL , if you finished repairing the faulty components, then clear the fault codes and turn on the vehicle ignition, it is surprise that you will find the check engine light is off. And more, LAUNCH Creader 3001 obd2 scanner can read the car's information such as VIN number. [ View Freeze Frame/Live Data Stream/ O2 Sensor/ Evap System test/ On-Board Monitor Test] : LAUNCH Creader 3001 is one useful and economic OBD2 FULL FUNCTION automotive diagnostic tool, support read live data for engine system, quick detecting vehicle failures, saving you the trips to your mechanic. [ 3 YEARS ]- Recommended by Mechanic Scotty Kilmer on Youtube. 100% Money Back ; If you are not satisfied with our obd2 scanner for any reason, send it back for a 100% no questions asked refund. ! Providing you with high quality product and friendliest customer service are our forever goal ! Why Choose Launch 3001? Launch 3001 is one obd2 full function scan tool, support over 10000+ car models, simple but usuful obd2 scanner! 1.What is different between launch 3001 code reader and AD310 code reader? They all work on MOST 1996 US-Based, 2000 EU-Based and Asian cars, check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes. view vehicle info. BUT 3001 have more function, it can do O2 Sensor test, Evap system test, On-Board monitor test. 2.What is different between launch 3001 obd2 scanner and AL319 scan tool? They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test 3.Launch 3001 is obd2 scanner for engine system with full test of obd2. Read Codes, Erase Codes, I/M Readiness, Data Stream View, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info, DTC Lookup. Read/Erase Codes: LAUNCH Creader 3001 car diagnostic scanner can show the detailed description of the Diagnostic Trouble Code (DTCs) and turns off Check Engine Light (MIL), clears codes and resets monitors. Live Data: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. It's a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light. Component Test (EVAP Test): Certain vehicle components can be actuated by commands sent from the scanner to test their operability. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. Read Vehicle Information (VIN): Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. 4.Launch 3001 support 7 lanuages: English, French, German, Spanish, Russian, Italian, Polish. What are the LAUNCH Creader 3001 OBD2 Scanner highlights? 1. TURN OFF “Check Engine Light”2.Read I/M Readiness Status3. View Freeze Frame4. View Data Stream5.O2 Sensor Test6.EVAP System test7.0ON-BOARD Monitor test8.Read& Clear DTCs9.Identify VIN Information10. DTC Lookup Library What we did upgrade on LAUNCH Creader 3001 OBD2 scanner on 2020 to make it more perfect? Add more car models, Fixed more bugs and upgrade car models up to 2020 new models, including cars, SUVs,minivans,light-duty trucks all over the world. But the year supported may vary on different car makes and models. Compared with the old version, LAUNCH Creader 3001 OBD2 scanner can be upgraded and it's lifetime free update. How to update LAUNCH Creader 3001 car code reader? Connect the scanner with PC by USB cable. Download update software from official website on computer. Click the "Creader Series Setup.exe" and follow the message to install the client software on computer. Hit "Product Update Tool Setup" to update. Vehicle Models Coverage: LAUNCH Creader 3001 code reader compatible with OBDII protocol, support work on Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Daweoo, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu,Jeep Ford, EU-Ford, GM, Chrysler, Mini, Vauxhall, Dacia, Alfa-Romeo, Lancia, Peugeot, Renault, Citroen, Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Porsche, Seat, Skoda, Audi, Saab, Sprinter,Chrysler,etc. It supports protocols including KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). (Note: Not compatible with Hybrid & Electric vehicles) Packing List: 1pcs*LAUNCH CR30011pcs*USB Cable1pcs*English manual
Price: 17.99 USD
Location: Perth Amboy, New Jersey
End Time: 2024-08-15T17:05:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: LAUNCH
Type2: Universal OBDII Scanner
Warranty: Lifetime
Screen: 1.8" TFT Screen
Vehicle Type: Passenger Vehicle
Manufacturer Part Number: CR3001 As AS200 MS309 AL319 LAUNCH CR319,CRP123
Similar Model 2: NT301 , NT201,AD410 AD310
Update: Life-time free update
Similar Model 1: AL419 ,AL519 AL539 AL619 ML529
Supported System: Engine, Full OBD2 functions
Accessories: Adapter Cable, USB Cable, User Guide
Type: Code Reader Scanner
Language: English, French, Russian, Spanish, German, Italian
Voltage: 12V
Connectivity: OBDII Cable
OBD Interface: CAN, OBDII, EOBD
Features: Live date display, O2 Sensor Test, EVAP Test, On-board Monitor Test, I/M Readiness,, Vehicle Information, OBD2 Full Functions, Backlit Display, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Item Weight: 6.4 ounces
