KBIC-240D KB Electronics DC SCR Chassis Speed Control Drive, 9464

Description: DescriptionThe KBIC® full-wave DC motor speed controls are designed for applications demanding excellent performance, high reliability and low cost. Although compact in size (only 4.30" x 3.64" x 1.25"), these controls offer better than 2% regulation over a 50:1 speed range. The controls are fabricated with components which have proven reliability, including MOV transient protection, which is used to protect the power bridge. Integrated circuitry is used to provide a non-complicated design with superior load and line voltage regulation. Electronic current limiting (CL) protects the motor and control against overloads by limiting the maximum level of output current. Acceleration start (adjustable from .5 to 4 seconds) provides a smooth start each time the AC power is applied.A unique feature of the KBIC® controls is the Plug-in Horsepower Resistor®. It eliminates the need for recalibrating IR Comp and Current Limit when the control is used on various horsepower motors. Additional versatility is achieved by using the Auxiliary Heatsink (optional) which is used to double the horsepower rating of each model. The output of the control is a linear function of potentiometer rotation. The KBIC® can also be operated in a voltage following mode by supplying an isolated analog signal (0 – 9VDC) to the input terminals P2 (+) and F-. The controls are terminated as standard with Q-D terminals. A Barrier Terminal Accessory Kit is available which incorporates both line and armature fuses. The Inhibit™ circuit (terminals I1 and I2) is provided to electronically disconnect the armature output voltage. Another standard feature is Auto Inhibit®. This circuit prevents false starts and high surge currents when cycling the KBIC® control with the AC line.A variety of models are provided with choices of voltage and current ratings. Model KBIC-240D operates on both 115 and 230 VAC to provide 0 – 90 and 180 VDC output. Model KBIC-240DS operates on both 115 and 230 VAC to provide 0 – 90 VDC output. Included with the controls are a 5K remote potentiometer, mounting hardware and operating instructions.Standard FeaturesPlug-in Horsepower Resistor® (see chart) allows a single model to be used on a wide range of motorsMOV Transient ProtectionTrimpots: MIN, MAX, ACCEL, IR & CLVoltage FollowingInhibit™ and Auto Inhibit®SpecificationsBrandKB Electronics (Nidec)Part Number9433Model NumberKBIC-125Maximum Rating0.75 HP (without Auxiliary Heatsink)0.56 kW (without Auxiliary Heatsink)1-1/2 HP (with Auxiliary Heatsink)1.13 kW (with Auxiliary Heatsink)Input115 Volts50/60HzMax Line Current12 AC Amps (without Auxiliary Heatsink)24 AC Amps (with Auxiliary Heatsink)Motor Voltage Range0 - 90 VDCField Voltage (Shunt Wound Motor Only)50, 100 VDCMax Load Current8 DC Amps (without Auxiliary Heatsink16 DC Amps (with Auxiliary Heatsink)Net Weight0.58 lbs (without Auxiliary Heatsink)0.26 kg (without Auxiliary Heatsink)2.5 lbs (with Auxiliary Heatsink)1.14 kg (with Auxiliary Heatsink)Dimension Reference Code”A” (without Auxiliary Heatsink)”B” (with Auxiliary Heatsink)Dimensions4.30" x 3.64" x 1.25" (LxWxH) Without Heatsink7.00" x 6.25" x 2.625" (LxWxH) With HeatsinkSpeed Range (Ratio)50:1Load Regulation (% Base Speed)1 (0 – Full Load, 50:1 Speed Range)Line Voltage Regulation (% Base Speed)1/2 (At Full Load, +/- 15% Line Variation)Control Linearity2 (% Speed vs Dial Rotation)CL/Torque Range0-300 % Full LoadAcceleration Time Range0.5-4.0 SecondsMinimum Speed Trimpot Range0-30 % Full SpeedMax Speed Trimpot Range50-140 % Full SpeedMax Allowable Ambient Temperature at Full Rating45°C113°F Plug-In Horsepower Resistor ChartThe Plug-In Horsepower Resistor (PHR) is supplied by your distributor and must be installed for the control to operate. It is used to automatically calibrate the IR Compensation and Current Limit based on motor horsepower and voltage. It eliminates the need to recalibrate the control in most applications. Select the correct PHR in accordance with the chart below. Be sure it is inserted completely into the mating sockets.115VAC In0-90VDC OutMotor HP230VAC In0-180VDC OutMotor HPApprox MotorCurrent (DC Amps)Resistor ValueKB ResistorPart Number1/1001/500.11 Ohm98331/501/250.20.51 Ohm98341/30, 1/251/150.350.35 Ohm98351/201/100.50.25 Ohm98361/15, 1/121/60.80.18 Ohm98371/10, 1/8, 1/61/41.30.1 Ohm98381/41/22.50.05 Ohm98391/33/43.30.035 Ohm98401/215.00.025 Ohm98413/4 ¹1.5 ²7.5 ¹, ²0.015 Ohm98421 ¹2 ²10 ¹, ²0.01 Ohm9843¹ Requires optional Auxiliary Heat Sink (KB Part Number 9861) for Operation at 115VAC² Requires optional Auxiliary Heat Sink (KB Part Number 9861) for Operation at 230VAC

Price: 119.97 USD

Location: Stevens, Pennsylvania

End Time: 2024-03-01T16:47:07.000Z

Shipping Cost: N/A USD