INTBUYING® Pad Printing Kit Manual Operate Pad Printing DIY for Pen,Ball etc.New

Description: 新建网页 25 INTBUYING® 　　 Full Set Pad Printing Kit Manual Pad Printer Set Manual Operate Pad Printing Set for Ball Pen Cup etc. Logos DIY 　　　 Pad printing is a printing process that can transfer a 2-D image onto a 3-D object. This is accomplished using an indirect offset (gravure) printing process that involves an image being transferred from the printing plate (cliché) via a silicone pad onto a substrate (surface to be printed). The unique properties of the silicone pad enable it to pick the image up from a flat plane and transfer it onto a variety of surfaces. Physical changes within the ink film both on the cliché and on the pad allow it leave the etched image area in favor of adhering to the pad, and to subsequently release from the pad in favor of adhering to the substrate (material being printed). 　　 Manual Single Color Pad Printer with Sealed InkCup (011022) 　 Pad printing is used for printing on various substrates like plastics,metals,glass and ceramics, paper and cardboard,leather.It is primary used in places where the printing area is small and/or the contour or surface of the object is not flat or hard to reach by other printing process. 　　 Parameters: Operation Way: manual Ink System: sealed ink cup Cup size: Φ3.54"(Φ9cm) Maximum printing area: Φ2.3"(Φ6cm) Max length of craftwork: 5.9"(15cm) Horizontal stroke: 4.9"(12.5cm) Vertical stroke of rubber head:2.36"(6cm) Machine size:17.1"x7.87"x25.2"(43.5x20x64cm) Net weight: 43.43Lb(19.7kg) 　 18"X12"UV Exposure Unit(010038) 　 Parameters: Exposing area: 18inch*12inch(45.7cm*30.4cm) 　 Voltage: 110v 　 Light power: 60W Attachment material:Stainless steel or zinc plating, nickel plating 　　 Plate Making Liquid 　　 These cliché making liquid allows the pad printer to take his film positive artwork and make inexpensive short run clichés. 1-Cleaning liquid 500ml/bottle 2-Photosensitive liquid 500ml/ bottle 3-Developing liquid 1000ml /bottle 4-Etching liquid 500ml/bottle 5-Stripping liquid 1000ml/bottle 　　　 Steel Plate Cliché 　　These pad printing steel plates use high quality steel,this steel is made to exacting specification for dimensional accuracy,parallelism, flatness and super hardened to ensure accurate,extra long lasting plate life.Produced for the pad printing industry. Wrought by high strength bearing steel High wear resistance at a low cost Sophisticated structure to be etched fine image both streak and halftone Parameters Size: thin plate:8.4"x3.9"x0.01"(214x100x0.3mm) Weight: thin plate:0.11Lb(0.05kg) 　　 Inkjet/Laser Transparency Film 　 Non-Waterproof Ink-Jet transparent Film is a specially coated,clear film that absorbs quick drying inkjet ink,and controls the shape of fine lines and half tones. This transparent inkjet film is only coated on one side.Printing on the coated (matte) side of the film! If you print on the glossy uncoated side, the ink will not dry because it is not absorbed by the coating. For the unique high-tech solution,they can not be conglutinated with each other when folded together.The image is well-resisting and suitable for storage. Note 1: This film also can be used in your laser printer. Note 1: Your wet finger will stick to the coated side. Note 2: Printing side is the non-smooth side. A4 8"x12" (210x297 mm) 　　 Ink Thinner 　　 This ink thinner is formulated for both pad printing and screen printing and are available in various evaporative rates that support fine tuning of the ink to any printing situation. They have been specially formulated to minimize evaporative fluctuations, provide process balance and enhance production output.This thinner can be used to dilute all kinds of plastic ink,PVC ink and others. 　 500ml/bottle 　　 Red PVC Ink 　　 PVC ink is the most popular ink used in pad printing,giving beautiful colors and designs to your favorite t-shirts and other items.It is also used for industrial printing clothing,on items such as dotted and anti-slip gloves. PVC ink requires fine particle resistant fast gelling at low temperatures, excellent opacity,qualities with good printability and anti-blocking.Finished printing features with excellent flexibility and weather resistance. 2.2LB(1kg)/can 　 Pads 　 Rubber head is a carrier which transfers the patterns on the steel plate onto the substrate surface.These pad printing rubber heads is with high print times and abrasion resistance,without any in purities,with good printing effects,permanent and durable. 　 Operation 　　 Item Included 　 Item# Description QTY Unit Note 011022 Pad Printer with sealed ink cup 1 set 　　 Item# Description QTY Unit Note 010038 18"X12" UV Exposure Unit 1 Set Voltage is 110V 　 Item# Description QTY Unit Note 011021 Thin Steel Plate 8-1/2"x3-7/8" 3 sheet 　　 Item# Description QTY Unit Note 011036 Oil Cleaning Liquid 500ml/Bottle 1 bottle 　　 Item# Description QTY Unit Note 011012 Photosensitive Liquid 500ml/Bottle 1 bottle 　　 Item# Description QTY Unit Note 011013 Developing Liquid 1000ml/Bottle 1 bottle 　　 Item# Description QTY Unit Note 011014 Etching liquid 500ml/Bottle 1 bottle 　　 Item# Description QTY Unit Note 011016 Stripping Liquid 1000ml/Bottle 1 bottle 　　 Item# Description QTY Unit Note 011032 Ink Thinner 500ml/Bottle 1 bottle 　　 Item# Description QTY Unit Note 007003 Inkjet/Laser Transparency Film 5 sheet 　　 Item# Description QTY Unit Note 011037 Silicone Rubber Pad L-2800 1 pc 　　 Item# Description QTY Unit Note 011038 Silicone Rubber Pad L-2810 1 pc 　　 Item# Description QTY Unit Note 011039 Silicone Rubber Pad R-0552 1 pc 　　 Item# Description QTY Unit Note 011040 Silicone Rubber Pad R-0582 1 pc 　 Item# Description QTY Unit Note 008014 Red PVC Ink - 1KG 1 can 　 Shipping & Handling Details Default Shipping Cost or Free Shipping Information: ▲ Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us. ▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information. ▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. Return / Refund If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges ▲ All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged. ▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges ▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details. Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding. ▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. ▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above. Payment eCheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you. Warranty & Feedback ▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. ▲ Any warranty shipping cost to us is responsible by buyer. ▲ Any shipping cost to buyer is responsible by the seller. ▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much. On Apr 16, 2023 at 19:44:12 PDT, seller added the following information:

Price: 670.68 USD

Location: Rancho Cucamonga, California

End Time: 2024-11-17T03:39:03.000Z

Shipping Cost: 149 USD