EWP150 Kit (12V) 150LPM/40GPM - Remote Electric Water Pump (Part #8060)

Description: Stores - 999automotive - Storesyou are buying EWP150 Kit (12V) 150LPM/40GPM - Remote Electric Water Pump (Part #8060)MESSAGE TO CUSTOMERS **EXTRA SHIPPING FEE MAY APPLY ON ORDER TO NORTH QLD, NT, SA, TAS & WA** **SOME PICTURES ARE FOR BRAND IMAGE / REFERENCE ONLY! BUYER WILL RECEIVED THE ITEM / PART NUMBERs WE LISTED** **SOME Universal PRODUCTS / application. Additional parts MAY be needed to complete install. Please consult professional installer for details** **SOME PRODUCTS ARE MADE TO ORDER OR BACK ORDER ONLY, WE WILL CONTACT BUYER FOR MORE DETAILS** **SOME ITEM MAY BE SENT FROM OVERSEA WAREHOUSE or MADE TO ORDER in AUSTRALIA IF OUT OF STOCK IN AUSTRALIA** **PLEASE ALLOW 5-8 WORKING DAYS HANDLING + 4-6 DAYS SHIPPING TIME** **SOME PART NUMBER WOULD NEED UP TO 2 WEEKS ETA** **SOME PRODUCTS ARE DESIGNED FOR RACE USE ONLY - NOT RECOMMENDED FOR STREET USE** **Professional installation is highly recommended (No Instruction Included). Any damage during installation will not be refunded**Electric Water Pump - EWP150 (ALLOY) (Part #8060) (12V) (Davies Craig)Muscle up your engine cooling system with the Davies Craig EWP® 150 alloy Electric Water Pump. Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and worked engines which develop excessive heat & intercooler applications.The compact EWP®150 alloy unit is manufactured with -AN16 (12) internal inlet and outlet threads for neat, tight screw-in fitting applications.This rugged alloy hi-flow electric water pump is designed to complement or replace the engines existing mechanical water pump. This essential performance accessory increases power to your vehicles drive wheels and improves coolant temperature control. KIT CONTENTSPART DESCRPTIONUNITSEWP150 Alloy1EWP Basic Wiring Harness1Hose Clamps2RED - Wire Joiner1RED - 6mm Ring Termina1RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection1SCREW - SELF TAP 8X3/8 BZ1 TECHNICAL SPECIFICATIONSOperating voltage3V DC to 15V DC Maximum current10A @ 13VFlow rate (max)150L/min (39.63 US gal/min) @ 13V DCOperating temp.-40° to 130°C (-40° to 266°F)Pump designClockwise centrifugal with volute chamberPump weight1,170 grams (2.6 lb)Pump materialAluminium (Powder Coated)Burst pressure500 kPa (72.5 psi)SealCeramic face sealSelf PrimingNo, none of our pumps are self-primingFits hose size35mm to 51mm (1.38 to 2)Push-On fitting SizeEWP Inlet & Outlet 38mmwith 3mm Sleeve (#8510) 44mmwith 6mm Sleeve (#8511) 51mmInternal Thread-Inlet & Outlet: -16AN (12) EWP® INSTALLATION OPTIONSInstalling an EWP® as an AUXILIARY PUMPLeaving the mechanical water pump in place, install the EWP® into the bottom radiator hose.Remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.EWP® INSTALLATION - disabling Mechanical water pumpLeaving the mechanical water pump in place, install the EWP® into the bottom radiator hose and remove the manufacturers thermostat.You will need to bypass the water pump pulley by installing an appropriate length belt (not supplied). This method makes for an easy installation.If running the pump continuously remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.In both these cases, the EWP® will pump past the impeller of the mechanical water pump.Disengaged mechanical water pump (recommended)Remove the mechanical water pump and remove the thermostat.Then remove the impeller from the mechanical pump shaft. Retain the mechanical water pump using the pump pulley as an idler to avoid re-routing the drive belt.Block any bypass passages and re-install the disengaged water pump ensuring that all gasket surfaces are clean and the new gaskets are properly fitted to prevent leaks.Install the EWPÒ into the bottom radiator hose.Removed mechanical water pump (Ideal)Remove the mechanical water pump and thermostat from the engine.Install a Davies Craig EWP® Header Adaptor or blanking plate (not supplied). Ensuring the gasket surfaces are clean and the appropriate gasket or sealant is used to prevent leaks.Install the EWP® into the bottom radiator hose. This method will require you to modify or replace the standard radiator hose.Install an appropriate length belt (not supplied) to drive the accessories.In most cases EWP® will be adequately supported by the radiator hose. Where mounting is required, the EWP® must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.*According to your country's shipping and customs laws, please be aware that your order may be subject to import duties and customs fees at time of delivery. These cost are not included in your shipping fee and will need to be paid by the customer. ABOUT US Triple Nine Automotive (999Automotive) was established in 2003 with the goal of providing customers a one stop place for all their vehicle needs. With more than 2000 performance products in our warehouse, we are proud to say that we will be able to cater to your requirements. At the workshop, our mechanics are trained from standard mechanical repairs to performance modifications, including suspension upgrades and a skilled in-house fabricator for your custom requirements. Equipped with a 4WD dynamometer from Dyno Dynamics, 999 Automotive provides aftermarket ECU tuning along with our customers being able to find out how much power their car produces in ShootOut mode. Our aim is to make our customers' cars reliable, we want our customers to enjoy the fun of the modifications we perform to their cars. Therefore, the power figure is not the only thing we are concern about. We care for all the modifications that make your car run smooth. In addition, we offer car enthusiasts our technical experience and expertise as well as the ability to diagnose and rectify any mechanical problems of your car to perform better or run more cost efficient. Our showroom displays a wide range of products for both interior and exterior upgrades from appearance to performance. OUR STORES Below Are Our Policy and Product Warning/Disclaimer, Please Read Before Buying: • All PERFORMANCE IMPORTED products and products listed in this ONLINE store are for Off Road Racing or Track Racing Use Only, NOT for Street use. • WE DO NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition. • Any Modifications to your vehicle Are AT YOUR OWN RISK. • You Should Also Contact Your Car's Manufacturer to Determine What Effects Modifications May Have on Your Safety, and Vehicle Warranty for installing these aftermarket products. • Under ANY circumstances, 999AUTO's maximum liability is limited to the purchase price of the products sold. 999AUTO shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. 999AUTO shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of services, loss of business, loss or damage to exemplary damages, whether or not 999AUTO is apprised of the possibility of such claims of damage. • No warranty is expressed for all IMPORTED PERFORMANCE Products. • You agree to the policy and terms stated on this listing by buying or bidding on this item. Please Do NOT buy or bid if you disagree with our policy and terms.Online Team - 999Automotive

Price: 251.1 AUD

Location: Lidcombe, NSW

End Time: 2024-05-16T13:10:37.000Z

Shipping Cost: 126.29 AUD