DOLBY CP-45 Stereo Analog 5.1 Channel Cinema Audio Processor

Description: DOLBY CP-45 Stereo Analog 5.1 Channel Cinema Audio DOLBY LABS CP-45 Analog 6 Channel Stereo Analog Audio Cinema Sound Processor Construction 3-U rack-mount chassis with plug-in modules accessible behind hinged front panel Signal Connections Standard screw-type connectors for audio signals and projector changeover control signals; automation connections via 15-pin D-connector. Signal Inputs treble adjustments for Ls and Rs channels, 50 or 100 Hz lowpass filter for subwoofer channel Noise Level Typically 65 dB (CCIR/ARM weighted) referenced to Dolby level Distortion Typically <015%, any channel, 1 kHz, at Dolby level (50% modulation) Accessories: Cat No 515 Second Surround Channel Module Cat No 516 Remote Fader: Cat No 545 Automation Interface Adapter Power Requirements: Power supplied via two outboard transformers includedNormal transformer supply 24 VAC, 1A Bypass transformer supply 24 VAC, 200 mADimensions and Weight 3-U rack-mount: 133 x 483 mm (525 x 19 inches); maximum projection behind mounting surface: 308 mm (121 inches); maximum projection in front of mounting surface: 40 mm (16 inches) Environmental Conditions 0 to 40 C (32 to 104 F) Regulatory Notices: North America: This unit complies with the limits for a Class A digital device pursuant to Part 15 of the FCC rules The unit also complies with Industry Canada ICES-003 Class A requirements, and is UL Listed for both US and Canada Europe: This unit complies with the requirements of Low Voltage Directive 73/23/EEC and EMC Directive 89/336/EEC, and carries the CE marking accordingly Optical: Balanced inputs for two projectors equipped with stereo solar cells; adjustable slit-loss EQ circuitry for flat response from virtually any type of optical soundhead; cells available from Dolby Laboratories mounted on brackets for most projector types Digital/Magnetic/Aux: Six-channel input for use with external digital adapter, magnetic preamp, or auxiliary source; 300 mV operating level Nonsync: One pair of inputs for stereo nonsync source, 10 k nominal input impedance, 30 mV maximum input sensitivity; internal 2:4 decoder may be used to generate ambient information for surround speakers from stereo sources Mic: Balanced input for dynamic microphone; 1 k nominal input impedance Signal Outputs :Output impedance: 150 (load >600) Maximum level: 82 dBu (2 V) Dolby level output adjust range: 38 to 12 dBu (10200 mV) Output for hearing-impaired: Center-weighted sum of L, C, R for connection to auxiliary hearing- impaired system; output impedance 25 k Dolby Decoding: Two-channel Dolby A-type/Dolby SR processing for film soundtracks; 2:4 channel decoder derives L, C, R, and S channels from two tracks on Dolby A-type or Dolby SR optical prints, and can decode the Nonsync 1 input; incorporates an adjustable delay line to optimize front-to-back surround separation Loudspeaker Equalization Equalizers for left, center, and right screen speakers provide 10 dB high- and low-frequency controls with adjustable turnover frequency, plus seven adjustable 8 dB narrowband filters covering 63 Hz to 18 kHz This item is Sold complete in good operating condition. This item was removed from a closed Cinema. Features: Left Center Right Sub Sub Woofer Octave Eq's Time Delay Optical Pre-Amp Non Sync Input. 5.1 Channel Cinema Processor. It can be used with all other standard Digital Processors such as Dolby DA-20 and a DTS 6D. See our other ebay sales for Dolby CP-200, CP-55, 65, CP-750 and CP-650 Processors and Cat 700, 701, 702 & Basement Digital readers*. Thank You For Visiting <

Price: 499.99 CAD

Location: Pembroke, Ontario

End Time: 2024-03-08T01:57:01.000Z

Shipping Cost: 74.17 CAD