Design Engineering 10470 Fire Sleeve/Tape Kit

Description: Design Engineering 10470 Fire Sleeve/Tape Kit SKU: BGWZ10470 MSRP: $26.85 Brand: Design Engineering Condition: New Manufacturer: Design Engineering Hazard: 7019905050 CA Prop65 Ind: Yes CA Prop65 Message: WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov CA Prop56 Image: https://www.catalograck.com/ImgVD/DEI/Prop_65_warning_label.jpg Merchandising Name: Fire Sleeve/Tape Kit Country of Origin: CA Heat Shrink SleeveFire Sleeve/Tape Kit Fire Sleeve/Tape Kit; 3/8 in. Inner Diameter x 36 in.;SPECIFICATIONS:WARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.govFEATURES:3/8 in. x 3 ft Length Of Fire SleeveIncludes 16 in Length Of Fire TapeInsulates Wiring/Hoses/Oil/Brake / Transmission Lines And MoreWithstands 500 Degrees F Continuous/2000 Degrees F Intermittent HeatBurn Protection During Under Hood Repairs And MaintenanceUse For Bundling And Protecting Hoses; Electrical Wiring Etc.Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.375 (3/8) inch x 36 inches Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 0.125 in. (1/8 in.) 5/16 24 SAE 3 0.1875 (3/16 in.) 3/8 24 SAE 4 0.25 (1/4 in.) 7/16 20 SAE 5 0.3125 (5/16 in.) 3/8 18 SAE 6 0.375 (3/8 in.) 9/16 18 SAE 8 0.5 (1/2 in.) 3/4 16 SAE 10 0.625 (5/8 in.) 7/8 14 SAE 12 0.75 (3/4 in.) 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1.25 (1-1/4 in.) 1-5/8 12 SAE 24 1.5 (1-1/2 in.) 1-7/8 12 SAE 28 1.75 (1-3/4 in.) 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.Design Engineering, Inc.(TM) is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.

Price: 34.42 USD

Location: Miami, Florida

End Time: 2025-01-28T14:32:01.000Z

Shipping Cost: 0 USD