CD player WADIA 861 used

Description: CD player WADIA 861 used from JapanDescription specification: 4 digital outputs:ST, coaxial (BNC), AES/EBU (XLR), TOS Supported sampling rate:96kHz, 48kHz, 44.1kHz, 32kHz (automatic identification) Output level (0dB reference):24Vrms (can be set to 5 levels with internal switch)4.2V, 2.4V, 1.1V, 0.57V, 0.29V) Output impedance:15Ω Dimensions/weight: 432x178x406mm (when using spikes)/22kg Maintenance completed at Audio Kobo (Kanagawa Television)(Various belt replacements, switch repairs, pickup repairs, DC balance adjustments, etc.) Main unit, spikes, remote control, instruction manual There are stains on the top plateThere are scratches that are not visible in the photo Wadia CD playerWarranty: 3 months Product DetailsWADIA 861 CD player The D/A conversion section is equipped with Wadia's original DigiMaster 2.4. In the general method, the frequency domain is controlled using digital filters and analog filters, but DigiMaster 2.4 uses a combination of ultra-high-speed calculation DSP and DigiMaster software to achieve high accuracy and high fidelity in the time domain. Performs completion. This solves problems such as group delay and transient ripple that occur with frequency domain methods in the D/A conversion process that converts discrete digital data back to analog. Wadia861 is equipped with two Motorola 56004 DSP ultra-high-speed processing elements that operate with 24-bit processing power and a total of four Burr Brown 1704K DAC chips on both channels, and supports 44.1kHz/16bit CD and external input 48kHz/ High-fidelity playback is achieved by supplementing digital signals up to 24 bits by up to 32 times (1,536MHz) and 96kHz/24bit by 16 times (1.536MHz). The DigiMaster software installed in Wadia861 was the latest at the time, DigiMaster 2.4, which added two new algorithm switching functions in addition to the conventional standard mode. Algorithm A uses Wadia's traditional time domain interpolation algorithm to reproduce sound with excellent image focus and spatial expression. In terms of frequency characteristics, such as the flatness of the passband, there is a slight roll-off of about 2dB around 20kHz, but on the other hand, it is an algorithm that takes advantage of Wadia's advantages. Algorithm B improves the flatness of the passband compared to Algorithm A while maintaining the time domain characteristics without significantly sacrificing them.Algorithm C has further improved the passband flatness characteristics than Algorithm B, has slightly relaxed the time domain characteristics, and has obtained excellent amplitude characteristics over the entire band. Equipped with a swift current I/V circuit born from the development of PowerDAC. This circuit uses the patented "SC-1 Current Conveyor" IC, which was completed using Wilson current mirror circuit technology, to achieve I/V conversion that eliminates the global feedback that is inevitable in general I/V conversion circuits. It has excellent transient characteristics and stability over a wide band. The final output circuit, which is directly connected to the I/V stage, is equipped with a buffer driver that has a high output current of 250 mA and a low impedance of 15 Ω that can drive even high-capacitance, low-impedance loads, and can also directly drive a power amplifier. is. Equipped with Wadia's original digital volume control as a volume control. This volume has a variable range of 50dB in 0.5dB steps. The reference level can be set in 5 levels from 0.3V to 4.2V using an internal selector depending on the sensitivity of the amplifier and speakers. It is also possible to control the L/R volume level balance in 0.2dB steps. Equipped with 4 digital input terminals and 4 digital output terminals that support sampling rates up to 24 bits of 96kHz/48kHz/44.1kHz/32kHz. Equipped with a sleeping digital input function, unused digital input terminals can be put into sleeping mode. This eliminates the risk of digital signals being contaminated by unnecessary noise from the input terminals. The transport section is equipped with a turntable transport mechanism that is the same size as the disc and is based on TEAC's CMK3.2. The housing has a rigid finish made of thick extruded aluminum material that disperses internal electromagnetic induction. please noteThis product is Japanese specification.Therefore, when you use it, please use a transformer that matches the voltage of the country of purchase.andPlease understand that it may be sold out as it is also sold at other stores. In that case, please be assured that we will pay the full amount of the transferred product price.addition:If we don't have the item you want, please email us the model number of the item and your budget.For any product, we will offer you the lowest price on ebay as much as possible.paymentsIn addition to PayPal payments, we accept credit card, debit card, gift card, Apple Pay, Google Pay, PayPal credit and other payments. Please pay immediately after purchase. AndWe also sell at other stores.Therefore, it may be sold out.Please understand at that time.Please be assured that we will refund the full amount at that time.Shipping・We use FedEx or EMS as our shipping company.Thanks to that, we can quickly deliver products to customers in countries all over the world.and• Shipping from Japan with Tracking Number & Insurance. • We usually ship out your order within 3-10 working days after receiving your payment.・Transportation may be suspended. In that case, it is not possible to export, so we are very sorry, but we will cancel it for your convenience.・The means of transportation may have been changed to surface mail only. In that case, we will contact you by email. And in case of cancellation, there is no excuse, but it will be convenient for the customer.About us We are located in Japan. It's our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items, please feel free to ask us.andIt will be very encouraging for us to receive a good evaluation when the product arrives at the customer. I look forward to working with you.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countries customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Price: 6849.99 USD

Location: Kobe shi Hyogo ken, null

End Time: 2024-08-16T16:13:28.000Z

Shipping Cost: 115 USD