2Pack LittleBee BLHeli-S 30A ESC DSHOT Controller For FPV Racing Quadcopter

Description: NEW-00023 2Pack LittleBee BLHeli-S 30A ESC DSHOT Controller For FPV Racing Quadcopter PRODUCT DESCRIPTION 2pcs LittleBee BLHeli_S 30A ESC DSHOT Speed Controller For FPV Racing QuadcopterFeatures:LittleBee BLHeli_S Spring 30A ESC BLHeli_S have all the performance you would hope for and the same tiny size as the DYS BL30A. You will struggle to find a frame small enough to fit these ESCs and they will still give you plenty of headroom on a standard 250 size quad!DshotDshot is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.Damped mode:This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.Easy upgrades:With the BLHELI software rapidly evolving, you can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way of adjusting and tweaking the settings of your escs.Specifications:Item name: LittleBee BLHeli_S SPRING 30A ESCInput Voltage: 2-6S LipoBEC Output: NoContinue Current: 30A, Burst Current: 35A up to 10SSize: 35*17mmWeight: 9g(include Power and signal wire)Support Damped mode, Oneshot125, Oneshot42 ,Multshot and DSHOTMain IC: SILABS EFM8BB21F16, MCU run 48MHzMOS: Both low and high side fets are NfetsSwitching speed is very fast, it has dedicated driver chipBLHeli_S Bootloader andamp; Firmware Whats included:2 pcs LittleBee BLHeli-S SPRING 30A ESC Shipping Contact Us Our products have been sent to the US warehouse. All items will be shipped via WINIT CORPORATION. In 2-5 working days, you will receive your items. Thank you and have a nice day. If you have any question about us or items, please contact us, we will reply it as soon as possible. Shipping Our products have been sent to the US warehouse. All items will be shipped via WINIT CORPORATION. In 2-5 working days, you will receive your items. Thank you and have a nice day. Contact Us If you have any question about us or items, please contact us, we will reply it as soon as possible. PaymentShippingReturn policyAbout usContact us Copyright © - Tongtool All rights reserved | Design:Tongtool

Price: 23.75 USD

Location: Walnut

End Time: 2025-01-08T03:49:07.000Z

Shipping Cost: 0 USD