Description: This an unused shop-made fixture plate for a Haas CM-1. It will also fit an OM-1 or OM-2. It is cut from 0.75" thick MIC-6 plate. Outer dimension are approximately 14" x 8.5". It has a pattern of 1/2-13 threaded holes at 1.25" spacing. The hole pattern matches that of the Saunders Machine Works plates and will fit SMW vises. The holes are also counter bored for 0.5" dowel pins. Four mounting holes in the corners are countersunk for 3/8-16 SHCSs and spaced 6.8" apart on the short dimension to accommodate T-slots on Hass OM-1, OM-2 and CM-1 tables. Top and bottom surfaces have not been faced and come with the factory MIC-6 plate surface finish. The front and back edges have a machined band to facilitate set up, otherwise the outer perimeter is unfinished.
Price: 165 USD
Location: Los Altos, California
End Time: 2025-01-09T23:13:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Overall Width: 8.5
Aluminum Sacrificial Plate: Aluminum Sacrificial Plate
Overall Length: 14 in
Plate Thickness: 0.75 in
Mini Pallet: Mini Pallet
MPN: Does Not Apply
Aluminum Fixture Plate: Aluminum Fixture Plate
Country/Region of Manufacture: United States
Modified Item: No
